# Inserting SIM card

**Please proceed through these steps only if you received drone without SIM card, or you want to change it.**

{% hint style="warning" %}
**The LTE module supports Nano SIM cards only!**
{% endhint %}

{% stepper %}
{% step %}
**Remove screws holding right side panel**

* Use hexagon screwdrivers to remove top, bottom and side screws marked in the pictures.

<div><figure><img src="/files/QQJDUJF5g5hLxLWf0zzU" alt=""><figcaption></figcaption></figure> <figure><img src="/files/9XWRxHGKumf6qZhRVELQ" alt=""><figcaption></figcaption></figure></div>
{% endstep %}

{% step %}
**Open side panel**

1. Open side panel at the front of the drone.
2. Slightly push side panel forward to unblock its rear side.

{% hint style="warning" %}
**Be careful with the antenna wire connection to avoid tearing it off!**
{% endhint %}

<figure><img src="/files/Hqu33VQmRJ0TG6sX7jUD" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/PLaB8orhJYmgi7JwLhU4" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
**Insert SIM card**

* Insert nano SIM card with the chip facing down and notch facing forward as shown in the picture.

<figure><img src="/files/k7QlzsHIk0c0uZbqrXvl" alt=""><figcaption></figcaption></figure>

* Properly inserted SIM card can be shown in the picture below.

<figure><img src="/files/tuUAg2un5lnSQMZm6VDg" alt=""><figcaption></figcaption></figure>
{% endstep %}

{% step %}
**Mount side panel back to the drone**

* Now you can mount side panel to its original place.

{% hint style="warning" %}
**When mounting the side panel, pay close attention to the connection wires to avoid pinching or cutting them!**
{% endhint %}
{% endstep %}
{% endstepper %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.airvolute.com/uas-platforms/patron-fpv/patron-fpv-user-manual/lte-patron-fpv/getting-started/inserting-sim-card.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.