This section will guide you through assembly of the antenna and propellers on the drone.
Screw on the antenna to the back of the FPV and slightly tighten it.
Mounting directions of antenna
Mounted antenna
Proceed to next step of mounting propellers.
There are two different pairs of propellers with different direction of rotation. They have to be mounted as follows:
Directions of propellers rotation
Slide the shaft through the propeller hole and screw on the securing nut. Tighten it firmly using the wrench. Repeat procedure on all four propellers.
If you are mounting 10" propellers, an additional contact washer is required for each propeller. Place the washer on top of the propeller before securing the nut, ensuring that the washer teeth face downward.
Mounting propeller process
Mounted propeller
Propellers have to be firmly tightened and must not freely move on the shaft without motor movement.
Mounting battery
It is recommended to charge a battery before mounting it. You are unable to arm the drone without sufficiently charged battery.
Put the battery on the upper plate of the FPV with cables facing to the back of the drone. Secure the battery using two Velcro fasteners (dry zip).
Do not plug in the battery for now!
Plugging in the battery will automatically turn on the drone, which will be armed if arm switch is in the wrong position!
