Specification
Each Nexus Stribog UAS consists of three UAVs, a GCS with Nexus software, and accessories to effectively operate the system. The system is delivered in a total of 4 backpacks: 3 backpacks include UAVs, and 1 operator backpack contains the accessories and GCS.
UAV overview
( 1 ) GPS Here4
( 7 ) Front-facing stereo camera
( 2 ) Li-Hv batteries
( 8 ) Down-facing IR camera
( 3 ) DroneCore autopilot
( 9 ) DoodleLabs antennas
( 4 ) Removable SSD - not included
( 10 ) Detachable legs
( 5 ) DoodleLabs radio
( 11 ) Lidar
( 6 ) Foldable arm
( 12 ) Foldable propellers
( 13 ) 360° camera for interceptor detection - missing from the drawing
( 14 ) NextVision Starling (EO/IR gimbal payload) - missing from the drawing
The configuration of the Nexus Stribog UAS slightly differs from the drawing. Here are the differences:
DoodleLabs antennas are asymmetrically located at the side of the UAV, sloping downward.
Removable SSD is not included.
A 360° camera for interceptor detection is not shown in the drawing; it is located at the tail of the drone. The camera consists of two parts: a connector fixed in the tail and a removable camera.
The NextVision Starling EO/IR gimbal payload is missing from the drawing. This payload is located at the bottom of the UAV.
Main parameters UAV
RTF weight without payload
4.7 kg
Max. take-off weight
6 kg
Flight time
~42 min (inc. 10% failsafe and mild wind)
Temperature range
-20 to 55°C
Max. horizontal speed
17 m/sec
Max. wind resistance
18 m/sec
Propellers
16"
IP Resistance level
IP54
Sensing system UAV
Forward
Stereo camera 95mm baseline
FOV: horizontal 92.76°, vertical 66.89°, 1280x800px
Downward
IR camera; FOV: horizontal 47°, vertical 36°, 256x192px
Global Navigation Satellite System
GPS + Galileo + BeiDou
Lidar
0.2 - 200m range
GNSS Denied stable altitude limit
100 m ( ideal 60-100 [m], day and night )
GNSS denied solution is always active and automatically refuses GPS updates when signal is unstable/spoofed. It is possible to configure the navigation system to use only visual data. The system should operate during night and day the same way.
Connectivity UAV
Micro USB port for SSH access
Payload - NextVision Starling EO/IR gimbal
Zoom
X40 (X20 + X2 digital)
Field of view
60° WFOV – 3° NFOV – 1.5° DFOV
Thermal resolution
640 x 480
Field of view
18° WFOV – 4.5° DFOV
Pitch
-45° to +135°
Yaw / Roll
-180° to +180°
Camera dimensions
40mm x 40mm x 65mm
Rugged laptop - GCS
Type
Rugged Notebook
Display
35.5 cm (14"), 1366 x 768 pixels, 1000 nits brightness
Keyboard
QWERTZ layout (German - DE)
Processor
Intel Core i5
RAM
8 GB
Storage
512 GB SSD
Graphics
Integrated (based on Intel Core i5)
Operating Systems
Linux (Ubuntu distribution)
Wireless Connectivity
Wi-Fi (802.11ac), Bluetooth
Ports
Thunderbolt 4, Audio
Battery
4200 mAh
Ingress Protection
IP53 (dust and splash resistant)
Radio link (M1-M6 Hex bands)
For GCS - Doodle Labs RM-2025-62W3
For UAV - Doodle Labs RM-2025-62M3
Antennas GCS
One patch (directional) antenna (Southwest Antennas 1009-015) (peak 12 dBi gain)
One omnidirectional Doodle Labs ANT-2025-2-GN-TNC (peak 2.4 dBi gain)
Antennas UAV
Two Doodle Labs ANT-2025-3-O (peak 4 dBi gain)
Last updated