Doodle Labs wearable battery - BAT-W01-A
BAT-W01-A
The battery pack is provided with the Doodle Labs Wearable radio. Featuring a custom Lock/Release mechanism, it ensures vibration resiliency by securely attaching to the Wearable Smart Radio. Housed in an IP67 rugged aluminum casing meeting MIL-STD-810H standards, the battery pack is fully USB-PD compliant and can be charged via a 5-V to 15-V power supply, compatible with various chargers including those for cell phones, laptops, and vehicle USB ports. The integrated smart battery management system (BMS) facilitates fast charging and supports extended continuous operation.
The charge this battery with Nexus Stribog UAS system, please use power adapter with supplied USB-C cables rated to meet the power requirements of the BAT-W01-A. Refer to LED and Power Behaviour section to indication during charging and operation.
Technical Specifications
Battery Capacity
5000mAh @ 36Wh
Cell Configuration
2x 21700 Li-Ion cells in 2S1P configuration
Output voltage
Nominal: 7.2 V Fully Charged: 8.4 V Discharge cutoff: 6.0 V
Charging voltage/current
USB-PD Charger: 5V/3A (lowest priority), 12V/2A5, 15V/3A (highest priority) DC Power Supply: DC 5V ~ DC 15V
Charging time to full capacity (without radio load)
5-V Charging Voltage: 220 mins 12-V Charging Voltage: 125 mins 15-V Charging Voltage: 115 mins
Temperature and relative humidity
Charging: 10 to 40℃, 60±25% R.H Discharging: -10 to 55℃, 60±25% R.H Storage: -5 to 35℃, 60±25% R.H
Interfaces
Power ON/OFF Button 1x USB-C port (input only) 1x bi-color Green/Red LED indicator
Operation Time(start w/ full battery charge, no USB-C PD charger plugged in)
Max Usage: 3.5 hours typical (Wearable MR Radio RM-1700-22W3 @ 915MHz, Ch BW 20MHz, MCS8, Turbo ON, GPS OFF, WiFi OFF @ 25°C) Normal Usage: 5.2 hours typical (Wearable MR Radio RM-1700-22W3 @ 915MHz, Ch BW 20MHz, MCS0, Turbo OFF, GPS OFF, WiFi OFF @ 25°C) standby: 6.5 hours (Wearable MR Radio RM-1700-22W3 @ Standby mode @ 25°C)
Storage leakage current
4.5 mA typically
Dimensions
99.75mm x 63.0mm x 30.4mm
Weight
291 grams
Ingress and resiliency
IP67 rated ingress protection MIL-STD-810H for vibration and shock
Technical Note:
If the battery box has to be stored for a long time (over 3 months), the environmental condition should be: Temperature: 23±5℃, Humidity: 60±25％RH
The voltage for a long time storage should be 7.4V~7.8V range.
Recharging the battery every 1 month is recommended.
LED and Power Behavior
Battery charging, USB-C PD Charger plugged in, Battery capacity < 5%
Fast blink RED LED
Battery charging, USB-C PD Charger plugged in, 5% ≤ Battery capacity < 60%
Medium blink YELLOW LED
Battery charging, USB-C PD Charger plugged in, 60% ≤ Battery capacity < 100%
Slow blink GREEN LED
Battery fully charged, USB-C PD Charger plugged in, Battery capacity 100%
GREEN LED is SOLID ON
Press PWR Button - ON mode
Solid YELLOW LED is ON and user shall hold the PWR button. Then solid GREEN LED is ON and user can release PWR button anytime then
Press PWR Button - OFF mode
Solid RED LED is ON and user shall hold the PWR button. Then RED LED will go off and user can release PWR button anytime then
Battery's temperature exceeds battery warm threshold or battery cool threshold
RED and GREEN LED blinks alternatively
a. Battery's temperature exceeds battery hot threshold or battery cold threshold
b. Battery is missing
RED LED blinks twice consecutively then
GREEN LED blinks twice consecutively and repeat
Special Safety Features
Preventive Power Cycling
Battery box will be forced to enter power OFF mode whenever there is no detection of Wearable MR radio even if the power ON button is pressed
Forced Manual Shut Down
Battery box will be forced to enter power OFF mode in the event of long press of power button
This page was created using resources from Doodle Labs documentation pages: https://techlibrary.doodlelabs.com/rugged-rechargeable-li-ion-battery-pack
Last updated