search
Ctrlk

Hardware Setup

circle-info

DroneCore Suite 2 is shipped with the compute module and extension board pre-assembled. No mechanical assembly is required before first use. If you need to replace or upgrade these components, refer to the

[mechanical assembly guide]([TODO: link]).

hashtag
1. Verify VDD_MAIN

Before connecting power, double-check:

  • The correct power supply voltage for your extension board (see Expansion Boards).

  • The power connector is firmly attached to the VDD_MAIN connector.

  • No short circuits or exposed conductors are present.

hashtag
2. Connect USB for SSH Access

Connect a Micro USB or USB-C cable from your host PC to the developer USB port on DCS2. This creates a USB-to-Ethernet connection used for SSH access.

hashtag
3. Connect HDMI (optional)

For local display access, connect an HDMI cable between DCS2 and a monitor before powering on.

hashtag
4. Apply Power

Connect the power supply to VDD_MAIN. The board will begin booting automatically.

Last updated