# Box content

**Autopilot**

* DroneCore 2 Pilot board with Jetson Orin NX 16GB and Cube
* Default adapter board with connectors
* Default PDB

**Accessories**

* PWM adapter – adapter to connect standard JR connectors used for PWM output, typically for motor control
* Interconnection cable (JST GH-8) for PWM adapter 6cm
* Interconnection cable (JST GH-8) for PWM adapter 12cm
* USB type A adapter (2pcs)
* LVDS 15pin flat cable, 15.2cm
* LVDS 15pin flat cable, 10cm
* Ethernet adapter
* 16pin flat cable, 15cm
* USB adapter Alink – USB to 3pin serial port converter used to configure USB (provided with DroneCore.Power); aditionaly common USB micro cable with data transfer functionality is needed
* 3 wire cable to connect USB adapter Alink with DroneCore.Power (provided with DroneCore.Power)
* JR to JST GH-3 cable for receiver connection
* Cable for power button JST GH-3 with 2 wires (provided with DroneCore.Power)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.airvolute.com/autopilots/dronecore-2/getting-started/box-content.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.